w/Curing Oven -- $1,757.00
w/Curing Oven -- $2,486.00
w/Curing Oven -- $2,486.00
w/Curing Oven -- $2,486.00
w/Curing Oven -- $3,068.00
w/Curing Oven -- $3,068.00
w/Curing Oven -- $3,068.00
w/Curing Oven -- $2,486.00
w/Curing Oven -- $2,486.00
w/Curing Oven -- $2,486.00
w/Curing Oven -- $3,068.00
w/Curing Oven -- $3,068.00
w/Curing Oven -- $3,068.00
| Fiber Optics Tools Keyword Search |
Adapters
Advanced Technician's
Workbook w/CD
Armor Cutters
Basic Technician's Workbook
w/CD
Bare Fiber Adapter
BICSI
Breakout Kits
Cable Casters
Cable Cutters
Cable Dispenser
Cable Splitter
Connector Cleaner
Connectors
Advanced Technician's
Workbook w/CD
Armor Cutters
Basic Technician's Workbook
w/CD
Bare Fiber Adapter
BICSI
Breakout Kits
Cable Casters
Cable Cutters
Cable Dispenser
Cable Splitter
Connector Cleaner
Connectors
OTDRs
Optical Test Sets
Piano Wire
Polishing Disks
Polishing Film
Power Source & Light Meters
Portable Lights
Safety Glasses
Scopes
Scribes & Cleavers
Skinny Fingers
Strippers (Jacket/Buffer)
Optical Test Sets
Piano Wire
Polishing Disks
Polishing Film
Power Source & Light Meters
Portable Lights
Safety Glasses
Scopes
Scribes & Cleavers
Skinny Fingers
Strippers (Jacket/Buffer)
Continuity Checker
Crimp Tool
Fanout Kits
Industry Text Books
Fiber Optic Talk Sets
IckiPads Cleaning Solvent
Kevlar Scissors
Kim Wipes
Labeler
Launch Cables
Mechanical Splices
Measuring Wheels
Mid-Span Entry Tools
Crimp Tool
Fanout Kits
Industry Text Books
Fiber Optic Talk Sets
IckiPads Cleaning Solvent
Kevlar Scissors
Kim Wipes
Labeler
Launch Cables
Mechanical Splices
Measuring Wheels
Mid-Span Entry Tools
Syringes
Termination Kits
Test Equipment
Test Leads
Tents (Splice)
Fiber Optics Training (Basic)
Fiber OpticsTraining (Advanced)
The Fiber Optics Association
VFL (Visual Fault Locator)
Wipes
Termination Kits
Test Equipment
Test Leads
Tents (Splice)
Fiber Optics Training (Basic)
Fiber OpticsTraining (Advanced)
The Fiber Optics Association
VFL (Visual Fault Locator)
Wipes
| Fiber Optics Tools You Should have Right Now! |
| Visual Fault Locater (Red Light Laser) |
"The universal adapter accepts any 2.5mm ferrule, allowing 650nm laser light to be injected into a fiber. This light
enables breaks or sharp bends in a cable to be identified 6-7km away on single mode fiber, 4-5km away on multi
mode fiber. Do not point it at low-flying helicopters - you might get one pointed back at you!"
enables breaks or sharp bends in a cable to be identified 6-7km away on single mode fiber, 4-5km away on multi
mode fiber. Do not point it at low-flying helicopters - you might get one pointed back at you!"
| $179.95 |
| $51.42 |
"The Miller cable splitters are manually operated cutting devices designed for fast, safe
and precise jacket removal of PE, PVC and rubber jacket. This is a bi-directional tool
that will make the removal of cable jacket much easier than using your pocket knife.
Pocket knifes are much better at removing fingers and other extremities. Get the 4.5 -
29 mm unit"
and precise jacket removal of PE, PVC and rubber jacket. This is a bi-directional tool
that will make the removal of cable jacket much easier than using your pocket knife.
Pocket knifes are much better at removing fingers and other extremities. Get the 4.5 -
29 mm unit"
| Bi-Directional Jacket Stripper w/Rotatable Blade |
| $59.95 |
"The Mini-Term Anaerobic Tool Kit from BID DataLynk contains all of the basic fiber optics tools we use in our classes. Take a look
at it and compare what's inside to what the others offer. We have 10 each of .3micron, 3 micron and 12 micron polishing film, Bare
Fiber Adapter, Stainless Steel Universal Polishing Puck (ST, SC and FC), 100X Inspection Scope, Kevlar Scissors, Miller Buffer
Removal Tool, Jacket Removal Tool, Carbide Scribe, Anaerobic Adhesive Kit, 100 Non-Woven Dry Wipes, Alcohol Storage Bottle,
Medium Density Polishing Pad, 10 each Applicators (Syringes). Crimp Tool for Breakout Style Cable, Durable Plastic Tool Kit.
at it and compare what's inside to what the others offer. We have 10 each of .3micron, 3 micron and 12 micron polishing film, Bare
Fiber Adapter, Stainless Steel Universal Polishing Puck (ST, SC and FC), 100X Inspection Scope, Kevlar Scissors, Miller Buffer
Removal Tool, Jacket Removal Tool, Carbide Scribe, Anaerobic Adhesive Kit, 100 Non-Woven Dry Wipes, Alcohol Storage Bottle,
Medium Density Polishing Pad, 10 each Applicators (Syringes). Crimp Tool for Breakout Style Cable, Durable Plastic Tool Kit.
| Mini-Term Anaerobic Tool Kit |
| Items for Mini-Term Kit can be purchased separately as indicated below. |
| ST Bare Fiber Adapter |
"This little guy is one of the coolest tools yet! Just strip off a bit of buffer, clean the
glass and insert it in to the "connector" while depressing the button. Works great
when testing fiber for fiber continuity on those good days when common sense is
prevailing."
glass and insert it in to the "connector" while depressing the button. Works great
when testing fiber for fiber continuity on those good days when common sense is
prevailing."
| Stainless Puck |
"This inexpensive tool will do ST, SC, and FC style connectors from most any manufacturer. You never know
when you are going to have to touch up a connector in the field. Trying to hold the connector perpendicular
when polishing is just not going to cut it - so to speak!"
when you are going to have to touch up a connector in the field. Trying to hold the connector perpendicular
when polishing is just not going to cut it - so to speak!"
| $55.00 |
| Anaerobic Adhesive Kit |
"This two part system self-cures in minutes with no heat required. The retaining
compound is injected into the connector with a syringe needle. Dip (I would
rather spray it because dipping causes fiber breakage and spillage) or spray
the fiber with primer and connectorize as usual. Sets up in seconds, fully cured
in minutes. BUT! You can not go out the night before and party. No early
morning mass quantities of coffee either! You have to have a steady hand, a
keen eye and, most importantly - you have to hold your mouth right or you are
going to be throwing your connectors in the trash. Do not blame me, the
company, or the stuff if you waste connectors. It consists of Loctite 680 Hardner
and Loctite 7649 Primer. Total Price should be about 20 bucks from your
favorite distributor."
compound is injected into the connector with a syringe needle. Dip (I would
rather spray it because dipping causes fiber breakage and spillage) or spray
the fiber with primer and connectorize as usual. Sets up in seconds, fully cured
in minutes. BUT! You can not go out the night before and party. No early
morning mass quantities of coffee either! You have to have a steady hand, a
keen eye and, most importantly - you have to hold your mouth right or you are
going to be throwing your connectors in the trash. Do not blame me, the
company, or the stuff if you waste connectors. It consists of Loctite 680 Hardner
and Loctite 7649 Primer. Total Price should be about 20 bucks from your
favorite distributor."
"The above adhesive can be purchased from distributors such as
Anixter or Graybar. Due to restricted shipment laws of hazardous
materials, we ship it with the Mini-Term Kit but not separately.
Anixter or Graybar. Due to restricted shipment laws of hazardous
materials, we ship it with the Mini-Term Kit but not separately.
Fiber optic connectors call for precision crimping which must meet non-optical disconnect
requirements or increased pull strength demands. This BDI DataLynk tool is designed to
successfully assemble a variety of connector styles for maximum optical performance and
mechanical strength. Package contains handle and die for 4 crimp sizes; .128, .137, .151 and
.190 inches.
requirements or increased pull strength demands. This BDI DataLynk tool is designed to
successfully assemble a variety of connector styles for maximum optical performance and
mechanical strength. Package contains handle and die for 4 crimp sizes; .128, .137, .151 and
.190 inches.
| Universal Crimp Tool |
| $79.95 |
Carbide Scribe
This high-performance
Scribe offers a wide cutting
surface in a plastic pen-like
housing. This unit is the
best for the price!
This high-performance
Scribe offers a wide cutting
surface in a plastic pen-like
housing. This unit is the
best for the price!
Economy Kevlar Cutter
(Blue Handle)
That's right! Now you can trim your
Kevlar strength member in a cheap
but expensive looking fashion.
(Others are available here).
(Blue Handle)
That's right! Now you can trim your
Kevlar strength member in a cheap
but expensive looking fashion.
(Others are available here).
| $25.95 |
$9.95
Miller Strippers
"Bob says that, 'You have to hold your mouth right to make these things work.' Well--- he's RIGHT!
But once you start holding your mouth right the Miller Stripper is an exceptional tool for stripping
250µm coated loose tube fiber and 900µm buffer tube. The Miller Stripper has a .0055 (0.14mm)
laser drilled hole, soft plastic-cushioned handle grip, and super accurate hardened stripping
jaws, insuring smooth clean stripping action. Be sure you adjust the jaws when you receive them
and I had better not see you stripping the insulation off that copper stuff with them either!"
But once you start holding your mouth right the Miller Stripper is an exceptional tool for stripping
250µm coated loose tube fiber and 900µm buffer tube. The Miller Stripper has a .0055 (0.14mm)
laser drilled hole, soft plastic-cushioned handle grip, and super accurate hardened stripping
jaws, insuring smooth clean stripping action. Be sure you adjust the jaws when you receive them
and I had better not see you stripping the insulation off that copper stuff with them either!"
$36.95
Jacket Stripper
Cut and strip jackets from simplex fiber cables. The dual "V" notch blade allows the quick removal of
jacket material. Additional features include plier nose, cushion grip and spring release making this a
COOL TOOL indeed.
Cut and strip jackets from simplex fiber cables. The dual "V" notch blade allows the quick removal of
jacket material. Additional features include plier nose, cushion grip and spring release making this a
COOL TOOL indeed.
$14.95
w/100x Scope $399.95
w/out 100x Scope $375.95
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Doctor Fiber's Termination Kits And Accessories
| Termination Kits |
This new toolbox has everything needed to be a complete package for the installer or the technician. This kit contains the tools to
terminate and polish SC, ST or FC connectors, a 100x microscope for inspecting fibers, an OM100 or OM200 series power meter
and an OS400 series source for testing loss through multimode or single-mode cables. Note: These kits ARE NOT Anaerobic
Tool Kits and contain NO consumables! See optional consumables kits below.
Termination Tools:
Safety Glasses
Scribe
Armored Tubing
Cutters
Kevlar Scissors
Needle Nose Pliers
terminate and polish SC, ST or FC connectors, a 100x microscope for inspecting fibers, an OM100 or OM200 series power meter
and an OS400 series source for testing loss through multimode or single-mode cables. Note: These kits ARE NOT Anaerobic
Tool Kits and contain NO consumables! See optional consumables kits below.
Termination Tools:
Safety Glasses
Scribe
Armored Tubing
Cutters
Kevlar Scissors
Needle Nose Pliers
Rotary Cable Stripper
Fiber Optic Stripper
Buffer Tube Stripper
Crimp Tool
Tweezers
Polishing Puck Polishing Plate
Oven (Optional See Below)
Fiber Optic Stripper
Buffer Tube Stripper
Crimp Tool
Tweezers
Polishing Puck Polishing Plate
Oven (Optional See Below)
Model Number
TBX51-MM Tool Kit,
MM source and Meter 850/1300, ST
W/Toolbox ------------------ OM120, OS420 -- $1,486.00
TBX51-SM-ST Tool Kit,
SM source and Meter 1310/1550 ST
W/Toolbox W/SM puck -- OM120, OS430 -- $2,215.00
TBX51-SM-FC Tool Kit,
SM source and Meter 1310/1550 FC
W/Toolbox W/SM puck -- OM120, OS430 -- $2,215.00
TBX51-SM-SC Tool Kit,
SM source and Meter 1310/1550 FC
W/Toolbox W/SM puck -- OM120, OS420 -- $2,215.00
TBX52-D-ST Tool Kit,
MM source 850/1300, ST; SM source 1310/1550-ST,
Meter W/Toolbox and
MM/SM Pucks -- OM120, OS420, OS430 -- $2,723.00
TBX52-D-FC Tool Kit,
MM source 850/1300, FC; SM source 1310/1550-ST, Meter
W/Toolbox and MM/SM Pucks
-- OM120, OS420, OS430 -- $2,723.00
TBX52-D-SC Tool Kit,
MM source 850/1300, SC; SM source 1310/1550-ST,
Meter W/Toolbox and MM/SM Pucks --
OM120, OS420, OS430 -- $2,723.00
TBX51-MM Tool Kit,
MM source and Meter 850/1300, ST
W/Toolbox ------------------ OM120, OS420 -- $1,486.00
TBX51-SM-ST Tool Kit,
SM source and Meter 1310/1550 ST
W/Toolbox W/SM puck -- OM120, OS430 -- $2,215.00
TBX51-SM-FC Tool Kit,
SM source and Meter 1310/1550 FC
W/Toolbox W/SM puck -- OM120, OS430 -- $2,215.00
TBX51-SM-SC Tool Kit,
SM source and Meter 1310/1550 FC
W/Toolbox W/SM puck -- OM120, OS420 -- $2,215.00
TBX52-D-ST Tool Kit,
MM source 850/1300, ST; SM source 1310/1550-ST,
Meter W/Toolbox and
MM/SM Pucks -- OM120, OS420, OS430 -- $2,723.00
TBX52-D-FC Tool Kit,
MM source 850/1300, FC; SM source 1310/1550-ST, Meter
W/Toolbox and MM/SM Pucks
-- OM120, OS420, OS430 -- $2,723.00
TBX52-D-SC Tool Kit,
MM source 850/1300, SC; SM source 1310/1550-ST,
Meter W/Toolbox and MM/SM Pucks --
OM120, OS420, OS430 -- $2,723.00
| TBX5 Series OLTS Tool Kits Without Data Storage |
| TBX6 Series OLTS Tool Kits With Data Storage |
| Optical Source & Meter Contents of the Kit (Click on Blue Link Below for Complete Description). |
Model Number
TBX61-MM Tool Kit,
MM source and Meter 850/1300, ST
TBX61-SM-ST Tool Kit,
SM source and Meter 1310/1550 ST W/Toolbox
W/SM puck -- OM220, OS430 -- $2,425.00
TBX61-SM-FC Tool Kit,
SM source and Meter 1310/1550 FC W/Toolbox
W/SM puck -- OM220, OS430 -- $2,425.00
TBX61-SM-SC Tool Kit,
SM source and Meter 1310/1550 FC W/Toolbox
W/SM puck -- OM220, OS420 -- $2,425.00
TBX62-D-ST Tool Kit,
MM source 850/1300, ST;
SM source 1310/1550-ST, MeterW/Toolbox and MM/SM Pucks
-- OM220, OS420, OS430 -- $2,933.00
TBX62-D-FC Tool Kit,
MM source 850/1300, FC; SM source 1310/1550-ST,
Meter W/Toolbox and MM/SM Pucks
-- OM220, OS420, OS430 -- $2,933.00
TBX62-D-SC Tool Kit,
MM source 850/1300, SC; SM source 1310/1550-ST, Meter --
W/Toolbox and MM/SM Pucks
-- OM220, OS420, OS430 -- $2,933.00
TBX61-MM Tool Kit,
MM source and Meter 850/1300, ST
TBX61-SM-ST Tool Kit,
SM source and Meter 1310/1550 ST W/Toolbox
W/SM puck -- OM220, OS430 -- $2,425.00
TBX61-SM-FC Tool Kit,
SM source and Meter 1310/1550 FC W/Toolbox
W/SM puck -- OM220, OS430 -- $2,425.00
TBX61-SM-SC Tool Kit,
SM source and Meter 1310/1550 FC W/Toolbox
W/SM puck -- OM220, OS420 -- $2,425.00
TBX62-D-ST Tool Kit,
MM source 850/1300, ST;
SM source 1310/1550-ST, MeterW/Toolbox and MM/SM Pucks
-- OM220, OS420, OS430 -- $2,933.00
TBX62-D-FC Tool Kit,
MM source 850/1300, FC; SM source 1310/1550-ST,
Meter W/Toolbox and MM/SM Pucks
-- OM220, OS420, OS430 -- $2,933.00
TBX62-D-SC Tool Kit,
MM source 850/1300, SC; SM source 1310/1550-ST, Meter --
W/Toolbox and MM/SM Pucks
-- OM220, OS420, OS430 -- $2,933.00
| Optical Source & Meter Contents of the Kit (Click on Blue Link Below for Complete Description). |
w/Curing Oven -- $1,622.00
w/Curing Oven -- $2,351.00
w/Curing Oven -- $2,351.00
w/Curing Oven -- $2,351.00
w/Curing Oven -- $2,858.00
w/Curing Oven -- $2,858.00
w/Curing Oven -- $2,858.00
w/Curing Oven -- $2,351.00
w/Curing Oven -- $2,351.00
w/Curing Oven -- $2,351.00
w/Curing Oven -- $2,858.00
w/Curing Oven -- $2,858.00
w/Curing Oven -- $2,858.00
| TBX-TLS Series (Tool kits without test equipment) |
AF-TBX-TLS - - Termination toolkit with case -- $695.00
AF-TBX-TLS-O - - Termination toolkit with case and oven -- $895.00
AF-TLS-100 - - Termination toolkit without case -- $659.00
AF-TLS-100-O - - Termination toolkit with oven and without case -- $859.00
AF-TBX-TLS-O - - Termination toolkit with case and oven -- $895.00
AF-TLS-100 - - Termination toolkit without case -- $659.00
AF-TLS-100-O - - Termination toolkit with oven and without case -- $859.00
| Please Forgive Us But This Page is Under Revision |
| TBX-TLS Series Optional Comsumables Kits |
| Consumables Kit P/N: AACK-01 |
Kit Contains:
25 Ea. Empty Syringes (Applicators) 2/.9mm Needle
1 Pack 100 Each, Non-Woven Dry Wipes
10 Ea. 12 Micron Polishing Film (Yellow)
10 Ea. 3 Micron Polishing Film ( Pink)
10 Ea. 0.3 Micron Polishing Film (White)
25 Ea. Empty Syringes (Applicators) 2/.9mm Needle
1 Pack 100 Each, Non-Woven Dry Wipes
10 Ea. 12 Micron Polishing Film (Yellow)
10 Ea. 3 Micron Polishing Film ( Pink)
10 Ea. 0.3 Micron Polishing Film (White)
$26.95
| $51.42 |
| ST Bare Fiber Adapter |
BDI DataLynk, LLC
| The Fiber Optic Training Professionals |
| Courses Offered 2008 Schedule About Us About Our Techs. Products Services Fiber Tech Database Partnerships Home |
| We Teach Procedures Not Opinions Since 1999. |